Wood trim can be nice....
Saturday, November 30, 2013
The Wreck of the Steamship Atlantic, 1873
Canadian Geographic, Dec 1981/Jan 1982 |
Forty years before the Titanic disaster, the White Star Line lost another great steamship off of Mosher Island, 14 miles southwest of Halifax, Nova Scotia. On April 1, 1873, this was the largest single-ship loss of life at that time. Constructed by Harland and Wolff in Belfast two years before, the Atlantic was made of iron with six water-tight bulkheads, 420 feet long and with a 41 foot beam, and four masts as a backup should the her compound engines fail. Carrying 900 passengers and crew, the ship was low on coal because the shipowners had only provided the bare minimum of low quality coal, which a fierce storm had helped to further reduce. The captain altered course for Halifax, but tragically mistook the position of the ship. Mistaking the Prospect lighthouse for the one off of Halifax Harbour, he steered the ship into the "ironbound coast" off Mosher Island. At 3 a.m. the ship ran full steam into Mars Head, bursting the boilers. The ship's length to beam ratio of 11 to 1 contributed to what happened next: she rolled over quickly, exposing the deck to the seas, and whole families were swept into the frigid waves. The island was a desolate place, and it was not until dawn that someone came by on the shore and saw the half-submerged steamer. In spite of valliant efforts (especially by the Reverend William Ancient, an itinerant Anglican preacher) at least 550 people perished, including all of the women and all but one of the children.
Friday, November 29, 2013
Vanished Tool Makers: Syncro Corporation, Oxford, Michigan
I picked up this Syncro Model 504 Sander/Polisher this week. All it needed was a new power cord and to have the push switch re-attached at the front. Does it ever vibrate! (According to the ad below, it could do double duty as a "marvelous massager"!)
According to Vintage Machinery, the Syncro Corporation started as a spin-off in 1946, making tools based on vibratory motors developed by the parent company. Between the mid-1950's and mid-1970's, they made a miniature scrollsaw that was marketed by Sears under both the Sears and Craftsman brands. The company ceased manufacture of power tools in 1974.
It looks like my Model 504 was upgraded in 1955:
According to Vintage Machinery, the Syncro Corporation started as a spin-off in 1946, making tools based on vibratory motors developed by the parent company. Between the mid-1950's and mid-1970's, they made a miniature scrollsaw that was marketed by Sears under both the Sears and Craftsman brands. The company ceased manufacture of power tools in 1974.
Popular Mechanics, October 1950 |
Popular Mechanics, February 1951 |
It looks like my Model 504 was upgraded in 1955:
The Family Handyman, May 1955 |
Thursday, November 28, 2013
1960-65 Ford Ranchero
Based on the compact Falcon. Available with 144 or 170 cu. in. six cylinder and from 1963, the 260 V8.
Wednesday, November 27, 2013
Women at War. Burrard Shipyards, Vancouver
Tuesday, November 26, 2013
Downed Heinkel 111K
The New Game of Courtship or Matrimony
J.L. Aranguren. Human Communication. McGraw-Hill Book Co., 1967. |
Monday, November 25, 2013
Locomotive Rockport
Chartered in June of 1867, the Rocky River Railroad ran from Bridge St. and Waverly Ave. westward to the east bank of the Rocky River, a distance of 5 1/2 mi. The Nickel Plate acquired control in Sept. 1881. No word on the ultimate disposition of the locomotive.
Bell X-2 in 1956
1957 Encyclopedia Year Book. The Story of Our Time. The Grolier Society Inc. |
The original Erie Canal
Edgar McInnis. The North American Nations. Toronto: J.M. Dent & Sons (Canada) Ltd., 1963. |
Charles A. Beard, Mary R. Beard and their son William Beard. The Beards' New Basic History of the United States. Garden City, NY: Doubleday & Co., Inc., 1944, 1960. |
Ontario School Geography. Toronto: The Educational Book Company, Limited, 1910. |
Burger Boat Company
1938
1944
from http://www.burgerboat.com/about/history
The company was sold several times over the years and went bankrupt in 1990 after the loss of several naval contracts. The company craftsmen and workers formed a group called the Former Burger Workers in order to keep in touch in the hopes that the company fortunes would reverse. 26 months later the business reopened and is still going strong.
Sunday, November 24, 2013
WWII Security Poster: Don't Tell Aunty and Uncle
Saturday, November 23, 2013
Unlikely Survivor, Pontiac Astre
Unobtainium version was the Cosworth twincam 2 litre engine but the common man who wanted more speed went the traditional hotrodder route, levering in a small block V8.
This ordinary example sits at a Toronto garage, not for sale...
We used to make things in this country. #135: The Easy Washing Machine Company, Toronto, Ontario
An old fan in my barn. I can't really figure out what the company's trademark above the "Easy" name above is supposed to represent. Really poor logo design.
In the late 1800's, a Vermont farmer named Cyrus A. Dodge invented a hand-operated clothes washer marketed as the "funnel on a stick" or "cone on a stick." In 1877, he partnered with Walter Zuill to found the Dodge and Zuill company in Syracuse, New York to manufacture this device.
1905 |
When electricity began to become more widely available in the early years of the 20th Century, various manufacturers turned their efforts to making electric clothes washers. In 1907, such washers were offered by the Automatic Electric Washer Company and the Hurley Machine Corporation. Maytag followed in 1911 with its electric "Hired Girl" wringer washer. In 1907, Dodge & Zuill came out with their own product, and in 1915 their machine achieved the highest award in the model kitchen exhibit at the Panama-Pacific International Exposition in San Francisco. In 1917, the company was reorganized as the Syracuse Washer Corporation, and then as the Syracuse Washing Machine Corporation two years later. By the mid-1920's the company was doing very well, and was reported to have the highest production of any home laundry equipment manufacturer in the world. In 1926, it brought out a wringerless model of washing machine. In 1932, it became the Easy Washing Machine Corporation. The company reached a peak in 1948, when 474,831 washing machines were sold.
Mr. Fix-It's Complete Book on How to Make Your Own Electrical Repairs. By Six Leading Authorities. NY: Greystone Press, 1953. |
The Canadian branch of the Easy Washing Machine Company was purchased by General Steel Wares (GSW) in 1958. GSW dates back to 1927, when 5 companies merged: McClary Manufacturing Company, London, Ontario; Sheet Metal Products Company of Canada Limited, Toronto; Thomas Davidson Manufacturing Company Limited, Montreal; E. T. Wright Limited, Hamilton, Ontario; and A. Aubry et fils Limitée, Montreal. GSW became a significant Canadian manufacturer of housewares and appliances, especially after buying the Happy Thought Foundry of Brantford, Ontario in 1920.) Beatty Brothers gained controlling interest in GSW in 1962, through a reverse takeover. GSW went on to absorb the Moffat Company, a large appliance manufacturer, in 1971, and to partner with the Canadian General Electric Company to form a joint venture called the Canadian Appliance Manufacturing Company (CAMCO) in 1976. In 2002, they bought the American Water Heater Company. CAMCO is gone now, fully absorbed into Canadian General Electric (CGE) (As a cynical aside, production of electric lamps at CGE's Oakville, Ontario plant was transferred to Winchester, Virginia in the 1990's, and production of incandescent lamps moved to Winchester in 2009. The Oakville plant was closed in 2010, and General Electric now produces these products in Mexico and China.)
As for electric fans, they obviously were part of the product line at some point. Interestingly, the Canadian company also acted as a distributor for Vornado fans.
We used to make things in this country. #134: McFarlane Manufacturing Company Ltd., Toronto, Ontario
The McFarlane Manufacturing Co. Limited was headquartered at 370 Main Street in Toronto, and manufactured ladders, washboards, sleighs, summer furniture and household woodenware under the "Bull Dog" brand. Obviously, they also made washboards marketed under the "Baby Globe" brand. Hand washing clothes with these things must have been awful, so its ironic that people now buy old ones to display in their expensive homes.