Clamp makers, out of Bridgeport, Connecticut. A newspaper article from 1928 mentions that the factory had survived a fire, so they'd been around since at least the 20's. They made a lot of different clamps, as my small inventory suggests:
They were still around in 1966 and were reported to have invented the pipe clamp, as shown in the news item below from Popular Mechanics of that year:
 |
| Carl W. Bertsch. The WISE Handbook of Basic Home Carpentry. New York: Wm. H. Wise & Co., Inc., 1952. |
Cheap stamped tools, not forgings.
Warren also trademarked the phrase, "Quality your grandfather trusted." It seems that Warren was swallowed up by Walter Meier Holdings AG in Switzerland in 2002. WMH now only offers clamps under the Wilton trademark, so the Brink and Cotton name has disappeared. Hopefully, not with the quality your grandfather trusted.
This is very interesting. I purchased a box of things at an auction and in it is a web clamp identified on one side with "Made in USA" and the other side "No.891 BRINK & COTTON MFG. BRIDGEPORT, CONN." I do not have the corner pieces or the wrench. I first thought it was just a cheap load strap, but after looking more closely realized it certainly was not a product of China. The stamped markings even have the punctuation as I typed here. They just do not make things as well as we used to in the good old USA.
ReplyDeleteI have been using this web clamp for, apparently, several decades. I don’t recall when I purchased it but I have the clamp, wrench and corner pieces. If you don’t have the corner pieces you’re not missing much. They have rounded inside corners which makes them almost useless for clamping up a picture frame or anything else with sharp corners. The web clamp has served me well for all these years. Mine is stamped “Made in Taiwan” so it is probably a bit newer than your version. I recently got a bunch of epoxy on the strap and had to replace it. Otherwise the clamp is working fine with no real signs of wear. I recently purchased a couple of ratchet web clamps that have their advantages but are bulkier than this web clamp. I will keep it in service for smaller projects. Besides, I like using older familiar tools. They have a history that gives me a peaceful confidence in my shop.
ReplyDeleteLike many wood workers I have an oddball assortment of c clamps. Out if probably 15 different makers I wound up with one B&C 6" clamp. I still notice when I pick it up during clamping operations as soon as I begin to adjust it. No other clamp comes close to it's buttery smoothness. Wish I had more.
ReplyDeleteThanks for your comment! Good tools are great to work with.
ReplyDeleteI recently became the owner of a few hand screw clamps. The seller said he had a few jorgensen and a no name. Not thinking anything of it, it went on the clamp rack. Until about 10 mins ago when I saw the faintly printed makers mark and came upon this page after a Google search. Wish I could post a picture to share with you guys. Great blog! Appreciate the knowledge!
ReplyDeleteThanks for the comment! You can send a picture to me at gerald@vanwyngaarden.ca and I'll happily post it!
ReplyDelete'Ell-o
ReplyDeleteHad for years, never appreciated, a Brink and Cotton No. 606 Bridge Clamp, C-clamp, that has been around forever. I cant remember where it came from but it is like new having never been used. A bit of shelf wear but I lube it regular and run er up and back once in a while. Must weigh 10 lbs or more.
Now I can find nearly zip about this company, what they did and who were the main people. Heavy tool.
I'll look.
l lucked into a No 142-2 inch Brink and Cotton c clamp for the amazing price of .49 cents cdn today 🙂
ReplyDeleteI borrowed some “old” clamps from a friend during COVID at the beginning of my woodworking campaign. They were rusted & sized up. I cleaned them up, used a torch to loosen up the screws, & got them working again. They are Brinks & Cotton F clamps, a pair of 12”, & a pair of 28”. They are of great quality. I hope my friend forgets I have them. 😜
ReplyDeleteGreat Quality tools. Mine's are 70 or more years old.
ReplyDeleteI have 2 143 b&s"s clamps and 1 144 b&c's clamp I love them made in the USA good tools are hard to find
ReplyDeleteLook out for them at estate and garage sales keep these old manufacturing companies alive don't let old tools go to the scrap yard folks they are beautiful and work xlnt
ReplyDelete