Friday, November 5, 2021

Collector toys



Too nice for the kids... Lionel we know, the 1955 Chev sedan delivery we know... The Muir-Hill dump trailer is one I had never seen before, Muir Hill built small locomotives in the twenties, started building construction equipment after WW2 and farm tractors in 1969. More at Farm Collector.

Thursday, November 4, 2021

Knight sleeve valve engine


The inner sleeve is actually the cylinder wall with piston travelling inside as normal, the outer sleeve slides over the inner, both sleeves slide up and down, timed to provide opening and closing of intake and exhaust ports as required. The sleeves are activated by a "camshaft" with connecting rods, talk about reciprocating mass! Expensive precision machining would be required for this to work, and oil consumption was normal. 
This technology would probably have been seen to be viable when poppet valves burned out early and regularly, and valve spring metallurgy wasn't up to the job. 
More here; Willys Knight
 

Champion Joel Robert sells Champions


The Charioteer
Translated , Joel Robert, the celebrated charioteer of ancient Rome blah blah, of course he used Champion spark plugs...
 

Wednesday, November 3, 2021

Railroad solutions


 In the early years the track condition on the CPR was very poor, note the complete lack of ballast in this image. Derailments were common, the locomotive #6, Nicola derailed twice in September 1884. One of these incidents resulted in serious damage to her tender, so a flatcar was quickly pressed into service, fitted with a wood rack and an added water tank. Reuse, recycle and make do.

Curtiss Wright Turbo Compound


Is this the ultimate development of the internal combustion engine? An aircooled dual row 18 cylinder radial engine, injected and supercharged. Three exhaust-driven turbines fed by 3 front, 3 back cylinders each, driving the crankshaft through fluid drives. Talk about a plumber's nightmare! They should have made a liquid cooled version, just to have more hoses and connections.
 The maintenance interval was apparently 3500 hours and in 1957 cost almost $90,000 each.  


Canadianflight.org

Tuesday, November 2, 2021

Dodge Rebellion


 In other words... buy domestic!

Build a custom motorcycle at home!

Reproduced in Chopper, the Real Story, by the Vintagent

I especially like the clever use of balsa to make a custom tank, we might be tempted to use Styrofoam today...
 

Monday, November 1, 2021

Motorcycle parking lot


 Lots of motorcycles, no people, must be the parking area for a motorcycle race! Maybe Peoria?

Motoconfort T7


 The shaft drive 750cc inline four T7 (B7 as a Motobecane model) was introduced at the 1930 Paris Salon, right in the depth of the Depression. The entire engine and side mounted transmission are finned, giving a very cohesive look.  Only 6 were built. Better picture from Sheldon's EMU below.  More here.


Motobecane club


Agricultural music

This sheet music shows how important the agricultural industry was in the 19th Century.  As a farm boy, I've listened to the frantic chatter of sickle mowers far too much, I hope this one is more entertaining to listen to. Marches are kinda out of the public eye, so there doesn't seem to be any versions on Youtube...