William Kilbourn. The Making of the Nation. The Canadian Centennial Publishing Co. Ltd, 1965; McClelland & Stewart Ltd., Revised Edition, 1973. |
Wednesday, December 31, 2014
Fokker for all your flying needs
Silver City Airways
Clifford Makins (Editor). The Eleventh Eagle Annual. London: Longacre Press Ltd., 1962. |
Silver City Airways started as a stunt in 1948, carrying an Armstrong Siddeley car from England to France inside a Bristol Freighter aircraft. When it landed and was unloading, the crew was approached by an observer who needed a way to get his Bentley back to England. This is how the air ferry started. In 1949 the company hired three Freighters, and in spite of the high costs, carried 2,600 cars, 100 motorcycles and 7,900 passengers in that year alone. In 1951, the company expanded to 8 aircraft, and attracted 7,529 cars, 3,240 motorcycles and 30,137 passengers. To get around a law that prohibited passengers from traveling without a vehicle (in order to protect airlines like B.E.A.), Silver City encouraged people to travel with a bicycle, even a borrowed one! Eventually, cows, racehorses, produce and general cargo also joined the manifest.
For the full article, read the High Road to France.
In 1962, economic pressures (including problems associated with its aging aircraft) led to a takeover by a holding company of British United Airways, and in the following year to an amalgamation with Channel Air Bridge, forming British Air Ferries. That entity soldiered on until 1971.
There's much more information at the Silver City Airway's tribute website.
Fritz Von Opel's rocket powered glider
Impression by Roger Gould, from Early Airplanes, by John Blake, Camden House Books 1974 |
Tuesday, December 30, 2014
Vanished Tool Brands: Canforge, Welland, Ontario
Canforge wrenches like those above are very rare in my neck of the woods, and these are the only four SAE ones I have ever encountered. Curiously, I've never turned up a duplicate. The wrenches are stamped "Forged Steel--Treated" and the ones in my collection include several whose openings are measured in 32nds of an inch. How long has it been since anyone has produced wrenches in these size. Also, if you look closely at the wrench second from the top, you'll notice it has no fractional size markings whatsoever, suggesting it was either supplied with a particular machine, or it dates back to the time before manufacturers put such markings on their wrenches. I don't know if the "Canadian Forge" wrench below was made by the same company as Canada Forge but, if so, they did make metric wrenches as well:
The Canada Forge Company Ltd was founded in Welland in 1906. In 1912, it was amalgamated with the Canadian Billings & Spencer Company of the same city, and with the James Smart company of Brockville, Ontario, becoming Canada Foundries & Forgings. During World War I, in addition to munitions, the company produced 100,000 of the infamous Ross rifles. By 1919, the company employed 1000 men, making it the largest employer in Welland. In 1977, it was renamed Canada Forgings, a division of Toromont Manufacturing of Toronto. It is still going strong, and counts among its customers such giants as Pratt & Whitney, General Dynamics, General Electric, Siemens Westinghouse, Atomic Energy, BF Goodrich and Rolls-Royce.
For early pictures of the company's premises and activities, visit the Welland Public Library site.
A half ton shell, 1921
Monday, December 29, 2014
Remington Electric Light Car, 1880s
The Remington Electric Light car and accessories designed for "Illuminating wrecks and enabling repairs to be carried on at night along Railroads".
The car housed a 5 hp boiler, engine and dynamo, and came equipped with five 2000 candle power arc lamps, related poles and wiring.
The car housed a 5 hp boiler, engine and dynamo, and came equipped with five 2000 candle power arc lamps, related poles and wiring.
Omer Lavallee; Van Horne's Road, Railfare Books, 1974 |
Steam locomotive
Overland Model 79
Pictorial Brighton 1859-1984. Brighton Anniversary Book Committee, 1984. |
The company was short-lived, founded in the early 1900's but purchased by Willys in 1908, who saved it from bankruptcy. The marque, however, was continued until 1926 until it was re-badged as Willys-Overland.
The Model 79 was introduced in 1913.
Sunday, December 28, 2014
Steamer Montauk
Ron Zeil, The Long Island Railroad in Early Photographs, Dover Publications, 1990 |
Fading Fiero
One of the better-looking GM products of the last few decades. This one, stored in a Scarborough industrial complex parking lot, looks neglected but still saveable.
Lucky Lindy's Pluck
From C.L. Paddock. Golden Stories for Boys and Girls. (Canadian Watchman Press, 1930).
Let this be a lesson to all of you! Keep away from poker games, drinking sprees and, most of all, girls!
Let's roll out the barrel!
First locomotive in the US
John Stevens (1749-1838) was an American inventor who had constructed a number of screw-driven steamboats before turning his attention to the idea of a steam-powered railroad. At his estate in Hoboken he built this locomotive which was capable of pulling several passenger cars.
Sidecar Sunday
Saturday, December 27, 2014
Electricity packs a Terrific Wallop!
Friday, December 26, 2014
Riley
Wood and fabric body, painted in French racing colours.
Seen at the 2014 Pittsburgh Vintage Grand Prix
We used to make things in this country. #120 (Revisited). The Peterborough Canoe Company, Peterborough, Ontario
From the 1953 catalogue of the J.H. Ashdown Hardware Company Limited, Winnipeg, Manitoba.
The Peterborough Canoe Company was founded in 1892 and its products are still highly prized. Following the Second World War, the company turned to the manufacture of power boats but was ultimately unsuccessful in competing against cheaper aluminum and fibreglass boats. It closed its doors in 1961.
See Mister G's earlier post for a catalogue entry for the company's canoes.
Dressed for candy making, 1927
Thursday, December 25, 2014
Wednesday, December 24, 2014
LaGuardia Airport, 1960
I was just at this airport and I can report that I saw no promenade like this, though the rest of the facility seems.... uhhhm "vintage". Not many propeller airplanes to be found either...
The annual Christmas tree harvest, 1962
Boeing KC135/707
The KC135 and 707 airliner were both developed from the Boeing 367-80 prototype of 1954. It was a huge gamble for Boeing that continues to pay off for the company. Over eight hundred KC135s were produced between 1956 and 1966, most of which are still in service. Over a thousand 707s were built between 1958 and 1979.
Len Martin, Airliners of the World, Arco Publishing 1966 |
Henry R.Palmer, This was Air Travel; Bonanza Books 1967 |
Tuesday, December 23, 2014
Chris Milner on his Bultaco
""Here Briton Chris Milner puts one foot on the ground for a steadying prod as he crosses a stream bed." From Graham Forsdyke. The Love of Motorcycling. Octopus Books Ltd., 1977.
|
The Blackheath Pedestrian
Monday, December 22, 2014
Subscribe to:
Posts (Atom)